Air Quality Neutral & Positive Assessments

£0.00

Air Quality Neutral & Positive Assessments

Air Quality Neutral & Positive Assessments assess whether a development meets or exceeds local policy requirements for minimising or offsetting air quality impacts, particularly in urban zones throughout London.

Air Quality Neutral & Positive Assessments

Demonstrate That Your Development Meets or Exceeds Air Quality Policy Standards

Air Quality Neutral and Positive Assessments evaluate whether your proposed development introduces additional air pollution — and if so, how much. These assessments are increasingly required by planning authorities, especially in major cities like London, to show that new developments either do not worsen local air quality (neutral) or actively improve it (positive).

Using emissions calculations for transport and building energy use, this service determines if your scheme complies with policies such as the London Plan, GLA guidance, and local air quality strategies. If exceedances are identified, we provide practical, achievable mitigation strategies to bring the scheme in line.


Why It Matters — and What You Risk Without It

Developments in Air Quality Management Areas (AQMAs) or subject to London Plan policy must now meet the air quality neutral or positive requirement. Without this assessment, you risk:

  • Rejection of planning applications in London boroughs

  • ⚠️ Requests for redesign or additional mitigation

  • 📣 Delays from public health objections or GLA referral

  • 🧾 Inability to demonstrate compliance with Environmental Impact requirements

Authorities are under pressure to improve air quality — and your application must prove it won’t contribute to the problem.


What’s Included

  • Quantification of NOx and PM emissions from both transport and building energy use

  • Comparison against air quality neutral benchmarks (GLA or borough-specific)

  • Review of baseline site conditions and proposed scheme design

  • Mitigation strategies if emissions exceed acceptable levels

  • Compliant, submission-ready report tailored for planning use


How It Works

  • You provide floor areas, transport data, energy strategy and site layout

  • We calculate expected pollutant emissions using GLA toolkits or DEFRA factors

  • Results are compared to neutral thresholds

  • If necessary, we recommend on-site or off-site mitigation to achieve neutrality or positivity


Who It’s For

  • 🏢 London-based developments subject to GLA planning

  • 🏙️ Urban schemes in areas with strict air quality policy

  • 🧱 Projects required to discharge air quality conditions

  • 🏛️ Consultants preparing Environmental Impact Assessments (EIA)


What You Get

  • 📊 Benchmark-compliant air quality neutral or positive assessment

  • 📄 Council and GLA-ready report with full emissions calculations

  • 🧠 Advice on achievable mitigation measures

  • ✅ Increased chance of planning approval in sensitive areas


Meet Today’s Planning Expectations — and Prove You’re Part of the Solution

Authorities are no longer satisfied with “minimal impact” — they expect neutrality or better. This service helps you meet those expectations with clarity, credibility, and confidence.

Alkali Environmental Consultants

Alkali Environmental is an environmental consultancy specialising in air quality, odour, dust, noise, and emissions monitoring. Working to UKAS and MCERTS standards, we provide regulator-approved data and clear, defensible reports for clients across the UK and internationally.

Recognised as one of the first consultancies to deliver industry-tailored environmental compliance, Alkali helps organisations meet Environment Agency (EA) and Environmental Permitting Regulations (EPR) requirements with precision and transparency.

Our team delivers stack emissions testing, dispersion modelling, air quality assessments, odour and noise surveys, flood risk assessments, and full permit management support. We offer free initial advice and consultation to help clients identify requirements, reduce risk, and achieve compliance quickly and cost-effectively.

View all Services

What Happens Next

Add your chosen services to the quote and submit the short request form. We’ll review your scope and follow this simple process:

  1. Add to Quote & Submit Request
    Pick your services, complete the RFQ form, and send.
  2. Receive Your Proposal
    For clear scopes we usually quote the same day. Complex projects may need a quick call to refine deliverables.
  3. Confirm & Prepare
    Approve the proposal and provide PO/payment. For site work we’ll issue your Site-Specific Protocol (SSP) and RAMS.
  4. Project Delivery
    On-site testing is MCERTS & UKAS accredited to ISO/IEC 17025. Consultancy delivered in person or remotely (Teams/phone).
  5. Analysis & Reporting
    You’ll receive clear, detailed reports covering all agreed deliverables, formatted for straightforward regulatory or project use.
  6. Expert Aftercare
    We’ll review your results with you and discuss any implications. If further testing or work is required, we’ll provide a separate quote. Regular customers may be eligible for loyalty pricing on future projects.